PSG identification (update: it's a Springfield)

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Dave Mudgett

Sam Inglis
Posts: 76
Joined: 8 Dec 2019 6:16 pm
Location: United Kingdom

PSG identification (update: it's a Springfield)

Post by Sam Inglis »

There's a pedal steel for sale in an auction here in the UK. It's a long way from me, and so far the auctioneers have shared one photo, which only shows the underneath of the instrument.

Image

I've asked them for more pix, but had no reply so far. Is anyone able to ID it from this? The listing says that it came from The Springfield Guitar Co, Tennessee, but I think that is a shop rather than a maker.
Last edited by Sam Inglis on 12 Oct 2025 5:00 am, edited 1 time in total.
Michael Lee Allen
Posts: 4590
Joined: 28 Jan 2004 1:01 am
Location: Portage Park / Irving Park, Chicago, Illinois

Re: PSG identification

Post by Michael Lee Allen »

Springfield was a small-output builder in Scotland. Another case of not knowing what you're selling so invent some "facts" to make it more attractive.
MLA
"Wisdom does not always come with age. Many times age arrives alone."
Sam Inglis
Posts: 76
Joined: 8 Dec 2019 6:16 pm
Location: United Kingdom

Re: PSG identification

Post by Sam Inglis »

I had heard about The Scottish Springfield Guitar Co, but wasn't sure if this is one of theirs or not -- there are almost no good photos to compare. And there IS a Springfield Guitar Co in Tennessee, so it's also possible someone bought whatever this is there and imported it. Hmmm.
User avatar
Lee Baucum
Posts: 10740
Joined: 11 Apr 1999 12:01 am
Location: McAllen, Texas (Extreme South) The Final Frontier

Re: PSG identification

Post by Lee Baucum »

Here is an older discussion:

viewtopic.php?t=127896
Lee, from South Texas - Down On The Rio Grande

There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.


Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat
Donny Hinson
Posts: 21726
Joined: 16 Feb 1999 1:01 am
Location: Glen Burnie, Md. U.S.A.

Re: PSG identification

Post by Donny Hinson »

I always bought for build quality, and what's there. It's a (pro style) wood-bodied S10, 3+4 all-pull, with adjustable legs and a flight case. Build quality seems to be good, and it appears to be in good shape. I'd put the value somewhere in the $2000-$2500 range, U.S..


Don't know what the PA speakeers are doing there, though?
Bobby D. Jones
Posts: 3099
Joined: 17 May 2010 9:27 am
Location: West Virginia, USA

Re: PSG identification

Post by Bobby D. Jones »

When you only have 1 picture, It is hard to really put a value on the guitar.
The guitar has a lot of good points.
Looks to be factory made, Or made by an excellent craftsman.
Looks like a right hand, S10 on a wide body, No pad screws visible.
3 pedals 4 knee levers.
Square Cross shafts
Machined bell cranks.
Machined end plates,
No extra holes where things have been changed or moved.
Good looking pedal bar, With sliding leg bar attachments.
The guitar has 2 adjustable legs, Should be for back legs.
The 1 front leg seen in picture. Has a ring to act as an up stop for the pedal bar.
Has an excellent looking well fitted case.
Hope you can get a picture of the front apron and top of the guitar.
Without top and front pictures, Without apron and top pictures would be hard to price.
Good Luck in this project.
Sam Inglis
Posts: 76
Joined: 8 Dec 2019 6:16 pm
Location: United Kingdom

Re: PSG identification

Post by Sam Inglis »

Thanks everyone. I have put in a cheeky bid. We'll see.
Sam Inglis
Posts: 76
Joined: 8 Dec 2019 6:16 pm
Location: United Kingdom

Re: PSG identification (update: it's a Springfield)

Post by Sam Inglis »

So, my cheeky bid was more successful than I'd expected, and I took delivery of the instrument today. It is indeed a Scottish-made Springfield and has probably never been nearer to Tennessee than Glasgow. I don't know where the auctioneers got that from. It has a three-up/one-down changer and machine heads that I've never seen before. I wonder if Springfield actually made those. However, I am not sure whether the undercarriage is original, as it looks nothing like the Springfield mechanisms I've seen photos of elsewhere.

Positives: it's all there and nothing seems obviously damaged. It's much, much lighter than my MSA Classic. The flightcase is excellent and has wheels. There's lots of potential for adjustment and I can set it up to suit my long legs. All the changes work and it returns to pitch OK.

Negatives: the top is not as good looking as the underneath! The wonky alignment of the rods and the return springs is not an optical illusion, though I don't know whether it matters. It definitely needs fettling: there is some friction between rods which causes unwanted sympathetic movement, though this seems more visible than audible, and the end stop for the RKR lever is misaligned. There seems a little more cabinet drop than on my MSA. I need to get it converted from Emmons to Day.

Most of the nylon hex nuts for tuning the changes seem to be completely jammed and won't turn. Does anyone have a good technique for freeing them? I'm reluctant to apply any more force for fear of damaging them.

Image
Image
Image
Image
Image
Image
Image
User avatar
Per Berner
Posts: 1969
Joined: 10 Aug 2004 12:01 am
Location: Skovde, Sweden

Re: PSG identification (update: it's a Springfield)

Post by Per Berner »

The tuning machines are Kluson Wafflebacks.
User avatar
Brian Hollands
Posts: 361
Joined: 15 Jan 2018 12:10 pm
Location: Geneva, FL USA

Re: PSG identification (update: it's a Springfield)

Post by Brian Hollands »

I had a Derby once that had those aluminum sleeves behind the tuning nuts. One had pretty much welded itself to the changer finger. No matter how much I turned the nut it wouldn't change the pitch. I took the nut and sleeve off, cleaned the sleeve up with a file and reinstalled it. Worked fine after that.
Not sure if that's your problem but if it helps...
Good luck with it.
'81 Sho-bud LDG, 2 EMCI's
User avatar
Bill Ford
Posts: 3859
Joined: 13 Dec 1999 1:01 am
Location: Graniteville SC Aiken

Re: PSG identification (update: it's a Springfield)

Post by Bill Ford »

(Most of the nylon hex nuts for tuning the changes seem to be completely jammed and won't turn. Does anyone have a good technique for freeing them? I'm reluctant to apply any more force for fear of damaging them.)

A pair of vicegrips clamped on the pullrod close to the changer should be able to turn nylon without damaging the rod, if that doesn"t work, detune the string and push in on the nylon to unhook rod from pull. Should be able to get pullrod out to work on it. I would get small washers to put between nylon and spacers.....Hobby shop for small washers.

BF
Bill Ford S12 CLR, S12 Lamar keyless, Misc amps&toys Sharp Covers
Steeling for Jesus now!!!
Bobby D. Jones
Posts: 3099
Joined: 17 May 2010 9:27 am
Location: West Virginia, USA

Re: PSG identification (update: it's a Springfield)

Post by Bobby D. Jones »

With the L shaped bend on the bell crank end of the pull rod, Allows no adjustment at Bell Crank end.
Remove the nylon tuners 1 at a time and check depth of hole in tuner nut. If the rod is reaching and bottoming out in tuning nut, Longer sleeves or washers between the tuning nut and the changer pull bar would be the easy fix.

Another easy fix would be. If you had proper size tap drill bit for hole in nylon tuner, And way to hold nylon nut well centered in a small lathe or drill press vice, Deepening the hole 3/8" (10mm) would be another cure for problem.

Good Luck in getting the tuners to tune proper. Happy Steelin with your new baby.
Sam Inglis
Posts: 76
Joined: 8 Dec 2019 6:16 pm
Location: United Kingdom

Re: PSG identification (update: it's a Springfield)

Post by Sam Inglis »

I've had a fun evening trying to set this up. Some of the nylon tuners were so stuck that I had to heat them up in order to make them turn, but I got them all off in the end, and managed to swap it over to the Day copedent.

But...

I initially thought I'd have no problem playing this guitar as the fixed legs are the same length as the ones on my MSA, which is I think one inch over standard height. However, the sockets that hold the legs are set at a much greater angle on this guitar. Even with the adjustable legs at their shortest setting, I measure 22 inches between the front and back feet on either side. On my MSA it's 17 inches, and that is a D10. So although the legs are long, the guitar is not high enough off the ground for me to play. I am not sure what to do about that. It's already less stable than the MSA because it's so much lighter, and lengthening the legs would make that worse.

Image

MSA on left, Springfield on right.
Bobby D. Jones
Posts: 3099
Joined: 17 May 2010 9:27 am
Location: West Virginia, USA

Re: PSG identification (update: it's a Springfield)

Post by Bobby D. Jones »

If you have trouble with a tight tuning nut. To help loosen the nylon nut. Grip the pull rod, With a set of Vice-Grips close to the changer, With a piece of leather to pad and protect the rod. Takes the torque twist out of the length of the pull rod.

I also went from MSA S10 Classic to a GFI Ultra, About 20 lb. lighter guitar, It was a learning experience.
The one thing I learned setting up the GFI, Make sure the rubber feet are soft and grippy. If you move the linkage, To make the knee levers travel farther to reach tune note, Takes less pressure on KL, Guitar will be more stable.

Welcome to the other side, I play Day setup too.
Good Luck getting the guitar set up, Happy Steelin.